The model of the existing A4 station building is over 20 years old and is of a generic NSWGR A4 design so I thought it was time to build a new one with a bit more research. I managed to find a couple of photos of Boorowa station and although it is an A4 design there are subtle differences to others of this type. As the building at this location is long gone I think this is as close I am going to get.

The shell of the building has been built  with the window and door apertures made and sprayed with self etch primer. As this is only a start on the project there is a long way to go. The walls are Evergreen 4083 novelty sheet and the plain plasticard  for the roof is .040″ the chimney’s are made the same way as the J3 Station Masters house.








Retired 69 year old model railway enthusiast.Likes, NSWGR LNER railways.Music, Mozart Beethoven, Elgar, Beatles, Rolling Stones,Miles Davis and many more.
This entry was posted in Buildings & Structures. Bookmark the permalink.

2 Responses to A NEW STATION BUILDING part one

  1. David Virgo says:

    Looks like a good start. I really appreciate the details about the materials you put in your posts. This is a great help to less experienced modellers like me.

  2. BURROWA says:

    Hi David thank you for your comment and interest in the site.I will follow up shortly with more info. Regards Peter

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s