ANDIAN MODELS TURRET TENDER part three

Next is the best approach to soldering  the turret tender top to the body. A couple of dry runs were undertaken to make sure everything fitted together nicely which it did to my amazement. Out came the soldering iron with Carrs 188 solder and I fitted and soldered the back first and then making sure the sides matched up ok tack soldered first and then ran a fillet along the seam and repeated the procedure to the other side.The body at this stage is still separate from the chassis.That concludes a bit more progress. Part four soon.

Image

Image

Image

Image

 

Advertisements

About BURROWA

Retired 69 year old model railway enthusiast.Likes, NSWGR LNER railways.Music, Mozart Beethoven, Elgar, Beatles, Rolling Stones,Miles Davis and many more.
This entry was posted in Trains & carriages. Bookmark the permalink.

2 Responses to ANDIAN MODELS TURRET TENDER part three

  1. Andrew Ottaway says:

    Looking really good peter! I’m also working on one

    • BURROWA says:

      Hi Andrew.It’s a good kit to construct,just take your time with it and it’ll work out ok .The ladder is quite fine so be careful with it. I have one from Casula Hobbies and thought I would use it but I’ll see how it turns out regards.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s